You Will Need - Diagral Rp550 Handbuch

We advise you to follow the recommendations given in this guide, written by security specialists.
If you have any comments to help us improve our guides or products, please do not hesitate to
contact us in writing, indicating the purchase date of your equipment.
The 230V control receiver enables you to:
trigger a flashing light AF500, a light or any 230V electric appliance intended to locate an alarm
or dissuade in the event of break-in, emergency call, tamper-proofing or fire, for a period of 3 or
30 minutes (only with Dual Frequency control panels),
control an automation system or activate a courtesy light with the LIGHT switch on your keypad or
remote control, in the timer mode (automatic stop after 3 minutes) or in the remote interruption mode
(activation and deactivation of the device by pressing the button, without limiting the duration),
confirm that your control panel is on COMPLETE OPERATION (or GROUP A + B OPERATION) or
OFF (only with Dual Frequency control panels)
control a 230V device in the impulse mode or in the ON / OFF mode with your alarm telephone
control (e.g. to simulate presence) or with your key ring remote control.
Some of these applications can be used together (see Configuration chapter).
A flat 3 mm screwdriver.
Two cruciform screwdrivers (small and medium sized).
A 6mm ø drill bit.
Fixing collars.
WARNING
OPERATION

YOU WILL NEED

49
GB