Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mini-4 M:
Output is via one 6-pin industrial socket on the rearpanel.
Connect your loads via an Alubar. The maximum load per channel is 1150 W. Please note that the maximum
current of 5 A must never be exceeded.
The occupation of the 6-pin industrial socket is:
OPERATION
After you connected the device to the mains, the MINI-4 is ready for use.
Light chase
The Chase/Audio-selector has to be set to Chase. If you turn the Speed-control clockwise, you can increase
the chaser speed.
Sound chase
The Chase/Audio-selector has to be set to Audio. Turn the Speed-control clockwise and the MINI-4 will
chase to the bass beat of the music. There is no need for a cable connection to the sound source as the
MINI-4 features a built-in condensor microphone.
Display
The four LEDs provide steady control over the outputs.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
13/25
MINI_4_V_1_2.DOC
Werbung
Inhaltsverzeichnis
