Yamaha TTR125 Fahrer- Und Wartungshandbuch Seite 492

Å ı
1
FRONT FORK
HANDLING NOTE
NOTE:
The front fork requires careful attention. So it is
recommended that the front fork be main-
tained at the dealers.
CAUTION:
To prevent an accidental explosion of air,
the following
observed:
The front fork with a built-in piston rod has
a very sophisticated internal construction
and is particularly sensitive to foreign
material.
Use enough care not to allow any foreign
material to come in when the oil is replaced
or when the front fork is disassembled and
reassembled.
EC553000
REMOVAL POINTS
Cap bolt
1. Remove:
Cap bolt 1
G
From the inner tube.
NOTE:
Before removing the front fork from the
machine, loosen the cap bolt.
Å TT-R125/TT-R125E/TT-R125LW
ı TT-R125LWE
Inner tube
1. Remove:
Dust seal 1
G
Stopper ring 2
G
Using slotted-head screwdriver.
CAUTION:
Take care not to scratch the inner tube.
2. Remove:
Bolt (damper rod)
G
Damper rod
G
Inner tube
G
Oil flow stopper
G
Piston metal
G
NOTE:
Use the damper rod holder 1 and the T-han-
dle 2 to lock the damper rod.
5 - 34
CHAS
instructions should be