Yamaha TTR125 Fahrer- Und Wartungshandbuch Seite 484

REAR WHEEL AND REAR BRAKE
5 - 30
2. Install:
Wheel sprocket 1
G
Lock washers 2
G
Nut (wheel sprocket) 3
G
43 Nm (4.3 m · kg, 31 ft · lb)
NOTE:
Tighten the nuts in stage, using a crisscross
G
pattern.
Bend the lock washer tab.
G
3. Install:
Collar (left)
G
Brake shoe plate assembly
G
Collar (right)
G
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
4. Install:
Rear wheel
G
NOTE:
Make sure that the slot a on the brake shoe
plate with the stopper b on the swingarm.
5. Install:
Drive chain 1
G
NOTE:
Push the wheel 2 forward and install the drive
chain.
6. Install:
Drive chain puller (left) 1
G
Plain washer 2
G
Wheel axle 3
G
NOTE:
Apply the lithium soap base grease on the
G
wheel axle.
Insert the wheel axle from left side.
G
CHAS
New