HOMCOM FDP15-2029ZR5 Bedienungsanleitung Seite 10

EN
REMOTE CONTROLLER
Remote controller
The remote controller transmits signals to the system.
1. BUTTON
The appliance will be started when it is energized or
will be stopped when it is in operation, if you press
this button.
2. BUTTON
Press this button to select the operation mode.
3. BUTTON
Used to select fan speed in sequence.
4.5 and
Used to adjust the room temperature and the timer.
6. BUTTON
Used to set or cancel
7. BUTTON
Used to set automatic off and automatic on time.
8. BUTTON
Used for automatic swing set.
How to install batteries
·Inserting batteries
1. Open the back cover;
2. Put the batteries inside the slot, with anode and cathode in right directions;
3. Put on the back cover.
Notices:
1) The anode and cathode of the batteries must be corresponding to the signs of "+"
and "-"on the remote control;
2) Do not use new battery cells together with run-down cells;
3) For long time no use, take out the batteries;
4) To prevent environmental pollution, take out the used batteries and dispose safely
and appropriately.
SETTING BUTTONS
Mode operation.
Slide the cover to open.
Be sure the direction is correct
9