Flexit Motion Bedienungsanleitung Seite 51

Factory settings (Ø100/125)
Standby mode
24 Hours mode
Speed Silent mode
Speed Max mode
Moisture extraction
Overrun timer
Delayed start timer
Timer moisture extraction
Operating signals
The fan's operating status is displayed on the control panel under the
0 m³/h
switch marked "STATUS" (5CP).
33/40 m³/h
Step 10
Step 6
Max
5 minutes
0 minutes
30 minutes
Green light - activated by an external switch or a motion sensor
Green flash every 2 seconds - fan is in standby
Red light - 24 Hours mode
Red flash every 2 seconds - activated by the moisture sensor
Red and green flash every 2 seconds - Interval ventilation
activated
Red flash twice a second - Delayed start activated
Green flash every 5 seconds - fan has been turned off via
remote control
51
User guide