Pause; Heat Preservation Function; Overtemperature Protection; Detection Of Small Objects - Pkm In5-Fzf Beschreibung

WARNING! Other cooking zones will keep operating if they have been
turned on previously.
If you want to change the set countdown time (cooking time) after programming,
you must start at step 1 again.
Press the "-" and "+" sensors simultaneously will automatically cancel timer
mode and display will show "00".
In the working state, if no cooking zone is selected, press the timing function
sensor to set time and start the time reminder function. When the set time is
reached, the buzzer will sound a warning for 30 seconds.

4.8 Pause

➢ Press the "pause" sensor in the working state, the cooker will enter the pause
state, and the display will show" "和"
function, press the "pause" sensor again, and the cooker will return to its previous
working state.
➢ If there is no operation within 10 minutes in the pause state, the cooker will
automatically turn off.

4.9 Heat preservation function

➢ Select the heating area, press the "keep warm" sensor, the cooking zone will enter
the heat preservation mode, and the display will show "
will heat with low power to maintain the proper temperature of the pot.
➢ The power is not adjustable under this function.

4.10 Overtemperature protection

❖ A temperature sensor monitors the temperatures inside the appliance.
The appliance will stop operating automatically when an overtemperature is
detected.

4.11 Detection of small objects

❖ When a small-sized or unsuitable cookware (e.g., aluminium) or small objects like
knives, forks etc. are placed on a coking zone, the appliance will turn into standby
mode automatically after 1 minute.
❖ The fan will keep cooling down the appliance for another minute.
" respectively. To cancel the pause
~ ~
72
" ,the induction hob