Electrical Connection - Pkm In5-Fzf Beschreibung

➢ There are ventilation holes around outside of the hob. YOU MUST ensure these
holes are not blocked by the worktop when you put the hob into position.
➢ Be aware that the glue that join the plastic or wooden material to the furniture,
must resist to temperature not below 150℃, to avoid the unstuck of the panel.
➢ The rear wall, adjacent and surrounding surfaces must therefore be able to
withstand an temperature of 90℃.
NOTICE! The induction hob must be in the installation opening of the
worktop properly and firmly. Check the seal for perfect fit and overall cover.

2.5 Electrical connection

DANGER!
household power supply) before you connect the appliance to the
mains. RISK OF ELECTRIC SHOCK!
DANGER! The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier.
Do not carry out the installation yourself. RISK OF ELECTRIC SHOCK!
DANGER! All electrical work must be carried out by a qualified
professional. Do not modify the energy supply. The connection must be
carried out in accordance with the current local and legal regulations. RISK
OF ELECTRIC SHOCK!
DANGER! Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
I
NSTRUCTIONS FOR THE INSTALLER
❖ Appliances with three-pole cable are set up for operation with alternating current
at the voltage and frequency indicated on the rating plate. The voltage of the
heating elements is 230 V. Remember that the connection wire should match the
connection type and the power rating of the cooker. The connection cable must
be secured in a strain-relief clamp. The ground wire must be connected to the
marked clamp of the terminal. The electric supply of the appliance must be
equipped with an emergency switch with a distance between the contacts of at
least 3 mm which disconnects the entire appliance from the mains in a case of
emergency. Read the information on the rating plate and the connection
diagram before connecting the appliance to the mains.
❖ When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
Switch off the power supply (fuse box of your
(
QUALIFIED PROFESSIONAL
~ ~
59
)