Handicare 4000 Anleitung
Fahreinheitmotor
Vorschau ausblenden
Andere Handbücher für 4000:
- Bedienungsanleitung (184 Seiten) ,
- Anleitung (16 Seiten) ,
- Montageanleitung (12 Seiten)
FREECURVE
HANDICARE 4000
Motore del blocco motore
Motor della unidad motriz
Fahreinheitmotor
Unit motor
Moteur du bloc moteur
Power pack motor
1000
ELEGANCE
SMART
ALLIANCE
CLASSIC
4000
1100
SIMPLICITY
STYLE
STYLE
SMART
A A 2 6 3 9 3
I N S T R U C T I O N
INSTRUCCIÓN
INSTRUCTIE
ANLEITUNG
INSTRUCTION
ISTRUZIONE
ES
I T
NL
FR
US
DE
EN
Verwandte Anleitungen für Handicare 4000
Inhaltszusammenfassung für Handicare 4000
- Seite 1 SMART SIMPLICITY STYLE ALLIANCE STYLE CLASSIC SMART A A 2 6 3 9 3 HANDICARE 4000 I N S T R U C T I O N INSTRUCCIÓN INSTRUCTIE ANLEITUNG INSTRUCTION ISTRUZIONE Motore del blocco motore Motor della unidad motriz...
-
Seite 2: Motor Replacement Spareparts
TOOLS & PARTS MOTOR REPLACEMENT KIT: KIT: AA24337 AA26393 STANDARD HEAVY DUTY SF23 13 mm 3 mm 44-398Lb-In 5 - 45 Nm INSTRUCTION 11P00266 6 mm Electro Static Discharge 1 MOTOR REPLACEMENT SPAREPARTS... - Seite 3 L’installazione di questo montascale deve essere eseguita da un tecnico appositamente certificato (per maggiori informazioni sulla competenza richiesta, si prega di controllare l’allegato del manuale di installazione). Conoscenza generale richiesta consultare il Manuale tecnico di 4000. È possibile scaricare le istruzioni più aggiornate relative al montascale e alle opzioni dal sito www.handicarepartners.com.
- Seite 4 MOTOR REPLACEMENT FIX A CLAMP ON RAIL 3 mm 13 mm 3 MOTOR REPLACEMENT SPAREPARTS...
- Seite 5 EXPLANATION [4]Fix a clamp onto the rail just below the powerpack trunnion casting; so that once the motor is removed the powerpack will fall back onto the clamp and will not activate the OSG once the powerpack freefalls. [5]Loosen the rivets(6x){A} and screws(2x){B} and remove the front cover{C}. [6]Disconnect all other connections of the seat looms.
- Seite 6 MOTOR REPLACEMENT REMOVE THE BATTERIES MOTOR WIRES BRAKE WIRES M1 _ 1 M1 _ 2 5 MOTOR REPLACEMENT SPAREPARTS...
- Seite 7 EXPLANATION [8]Disconnect the batteries. [9]Remove the batteries. [10]Remove the battery tray from the powerpack. [11]Disconnect the motor leads from the HAN 125{A}. Disconnect the brake lead from the HAN 125{B}. [8]Koppel de accu’s los. [9]Verwijder de accu’s. [10]Verwijder de accuhouder uit de unit. [11]Maak de motordraden los van de HAN 125{A}.
- Seite 8 MOTOR REPLACEMENT REPLACE THE MOTOR 6 mm STANDARD HEAVY DUTY 7 MOTOR REPLACEMENT SPAREPARTS...
- Seite 9 EXPLANATION [12]Disconnect the hand winder switch (S35). [13]Remove the 4 bolts. [14S]Standard: remove the motor from the powerpack; the powerpack will freefall if the rail clamp has not been fitted. [14H]Heavy duty: remove the motor from the powerpack; the powerpack will freefall if the rail clamp has not been fitted.
- Seite 10 MOTOR REPLACEMENT REPLACE THE MOTOR STANDARD HEAVY DUTY STANDARD HEAVY DUTY...
- Seite 11 EXPLANATION [15S]Standard: fit the new motor onto the powerpack{B}. The keyways may not line up so it will need hand-winding to the correct position{A}. [15H]Heavy duty: fit the new motor onto the powerpack{B}. The keyways may not line up so it will need hand-win- ding to the correct position{A}.
- Seite 12 MOTOR REPLACEMENT FASTEN THE NEW MOTOR STANDARD HEAVY DUTY 6 mm 6 mm 25 Nm 25 Nm 221 Lb-In 221 Lb-In MOTOR WIRES BRAKE WIRES M1 _ 1 M1 _ 2 RIGHT M1 _ 1 M1 _ 2 LEFT 11 MOTOR REPLACEMENT SPAREPARTS...
- Seite 13 EXPLANATION [17S]Standard: fasten the bolts of the motor{25 Nm | 221 Lb-In}. [17H]Heavy duty: fasten the bolts of the motor{25 Nm | 221 Lb-In}. [18]Reconnect the hand winder switch (S35). [19]Depending on the configuration reconnect the motor leads from the HAN 125{A}. Reconnect the brake lead from the HAN 125{B}.
- Seite 14 MOTOR REPLACEMENT REINSTALL THE BATTERIES HEAVY DUTY STANDARD 8 mm 13 mm 40 Nm 33 Nm 354 Lb-In 292 Lb-In 13 MOTOR REPLACEMENT SPAREPARTS...
- Seite 15 EXPLANATION [20]Install the battery tray. [21]Install the batteries. [22S]Standard: keep the seat base in the correct height position and reinstall the seat. [22H]Heavy duty: keep the seat base in the correct height position and reinstall the seat. [20]Installeer de accuhouder. [21]Plaats de accu’s.
- Seite 16 MOTOR REPLACEMENT REINSTALL THE FRONT COVER 3 mm 3.10 15 MOTOR REPLACEMENT SPAREPARTS...
- Seite 17 EXPLANATION [23]Reconnect the seat cable. [24]Reconnect the wires of the batteries. [25]Reinstall the front cover{A} and secure with the rivets(6x){B} and screws(2x){C}. [26]Remove the clamp. [27]Check the function of the lift. [23]Sluit de stoelkabel opnieuw aan. [24]Sluit de draden van de accu’s opnieuw aan. [25]Herinstalleer de voorkap{A} en zet hem vast met de pluggen (6x){B} en schroeven (2x){C}.
- Seite 18 Questo kit deve essere installato da un tecnico certificato. È possibile scaricare le più recenti istruzioni relative al montascale e alle varie opzioni dal sito Web www.handicarepartners.com. Date Version Change 13-01-25 Change article numbers Handicare Stairlifts B.V. Handicare Montascale Newtonstraat 35 Via Chiaviche 17 1704 SB Heerhugowaard 46020 Pegognaga (MN) The Netherlands...