Werbung
EC240000
CABLE ROUTING DIAGRAM
1 Hose guide
2 Brake hose
3 Fuel tank breather hose
4 Engine stop switch lead
5 Oil tank breather hose
6 Sub-wire harness
7 Neutral switch lead
8 Cable guide
9 Cylinder head breather hose
0 CDI magneto lead
A Radiator breather hose
B Carburetor breather hose
C Carburetor overflow hose
D Ignition coil lead
E CDI unit lead
CABLE ROUTING DIAGRAM
Å Pass the fuel tank breather hose
between the handlebar and ten-
sion bar, then insert its end into
the hole of the number plate.
ı Fasten the engine stop switch
lead and ignition coil lead of the
sub-wire harness.
Ç Fasten the sub-wire harness
and engine stop switch lead.
Fasten the engine stop switch
lead at its protecting tube.
Î Fasten the sub-wire harness
and engine stop switch leads.
‰ Pass
the
sub-wire
between upper engine brackets.
2 - 18
Ï Fasten the sub-wire harness.
Ì Fasten the throttle position sen-
sor lead.
Ó Pass the carburetor breather
hose
and
between the connecting rod and
cross tube (frame).
È Fasten the neutral switch lead
on the oil hose.
Ô Pass the clutch cable through
the cable guide.
Fasten
breather hose and neutral switch
harness
lead.
Ò Fasten the neutral switch lead.
SPEC
overflow
hose
the
cylinder
head
Werbung
Kapitel
