Teaching-In Directly To Homematic Devices - HomeMatic HM-LC-Dim1L-CV Installations- Und Bedienungsanleitung

6.2 Teaching-in directly to Homematic
devices
If you want to teach-in the dimming actuator to one or
more Homematic devices, you must put the devices to
be taught-in into teach-in mode
During teach-in, please make sure you
maintain a distance of at least 50 cm between
the devices.
To teach in, proceed as follows:
• Activate teach-in mode of the dimming actuator by
pressing and holding down the channel button (B)
for at least 4 seconds. Teach-in mode is indicated
by the device LED flashing continuously.
• Now put the device in to which you wish to teach
the dimming actuator into teach-in mode by follow-
ing the relevant operating manual instructions.
• The devices are now being connected.
If no teaching-in occurs, teach-in mode is automati-
cally ended after 20 seconds. If other devices are in
teach-in mode, these are connected.
Start up
33