Operation; Resetting To Factory Status - HomeMatic HM-LC-Dim1L-CV Installations- Und Bedienungsanleitung

7

Operation

After teaching, simple operating functions are available
using the taught-in control elements.
Brief press of the button: ON/OFF, long button press:
Dim.
The following behavior results in this case:
Button
Brief button press
"ON" button
Brief button press
"OFF" button
Long button press
"ON" button
Long button press
"OFF" button
8

Resetting to factory status

In order to reset the actuator to factory status, switch
the device to teach mode with the (first) channel but-
ton (hold button pressed for at least 4 seconds). If the
device is in teach mode, hold the (first) channel button
pressed down for at least 4 seconds. The actuator re-
set is indicated by the device LED flashing quickly.
Behavior
ON
OFF
Brighter
Darker
Operation
37