Filling The Water Tank - Homcom 824-113V90 Bedienungsanleitung

FILLING THE WATER TANK

Insert each Castor wheel into the holes at the base of the unit, Push Each Castor
in unitl they are in a fixed position, Repeat for each Wheel
WARNING: Unplug the unit from the mains supply before removing
the water tank
Important:
Do not use water with any chemical additives added. The water must be
cold or lukewarm, do not use hot water above 40°C.
Do not fill water above the 'MAX' line on the front of the Water Tank.
1. Turn the Water Tank Lock anti-clockwise to the horizontal position to unlock,
and take out the Water Tank.
2. To remove the Water Tank completely, first remove the pump by pressing
the two end tabs.
1. Fill clean, cold water into the Water Tank, taking care not to overfill above the
'MAX' line.
2. To replace the Water Tank, first insert the pump into its slot by pressing the two
end tabs. Carefully push the Water Tank into its position, and turn the Water
Tank Lock clockwise to the vertical position to lock.
Water Tank Lock-turn
anti-clockwise to unlock
Pump-press the tabs to
remove
6