Troubleshooting - Yamaha RX-V577 Anschlussanleitung

Troubleshooting

Cannot connect using WPS.
• Only some access point is WPS-compatible. If you are unable to connect using WPS,
try another connection method.
Cannot connect to access point.
• If the wireless channel of the access point set to "12" or "13", change it to a channel
between "1" and "11" (USA, Canada, Taiwan and General models only).
Unable to find access point using Access Point Scan.
• If the unit is too far away from the access point or there is an obstacle between them,
try searching again in close proximity to the access point, in a location where there
are no obstacles between the two devices.
• The access point may be set to refuse SSID broadcast. Set the SSID, security mode,
and key by using "Manual Setting". For details on settings, refer to the Owner's
Manual.
Not connected to the Internet, or connected to the Internet, but
experiencing sound skipping.
• If there is a microwave oven in the immediate area, electromagnetic waves from the
microwave oven may be interfering with the wireless transmissions. Move further
away from the microwave oven and try connecting again.
• The MAC address filter may be enabled on the access point. Disable the MAC
address filter or specify the MAC address of the unit.
• Turn on the power to the unit again.
• Turn on the power to the wireless router (access point) again.
• Audio content that utilizes a significant amount of data may not transmit correctly over
a wireless connection in some cases. Use audio formats that require a small amount
of data or use the wired network connection.
4
En