Front Panel - Yamaha CD-S1000 Bedienungsanleitung

Controls and functions

■ Front panel

POWER
ON
OFF
1
1 POWER
Press upward or downward to turn on or off this unit.
y
• The POWER indicator above lights up when this unit is turned
on.
• Playback starts automatically if the power is turned on while a
disc is set in the disc tray.
2 Remote control sensor
Receives signals from the remote control.
3 SA-CD/CD
Switches the playback layer of a hybrid SA-CD between
SA-CD and CD (see page 19).
y
• The SA-CD/CD indicator above lights up when the SA-CD
layer is selected.
• This setting is retained even if you turn off this unit.
Notes
• Audio signals are only output from the ANALOG OUT jacks
while the Super Audio CD layer is selected.
• Audio signals recorded in DSD multi-channel format cannot be
played on this unit.
6
En
SA-CD/CD
2 3
PURE DIRECT
4
4 PURE DIRECT
Turns on the PURE DIRECT mode to improve audio
quality.
When this unit is in the PURE DIRECT mode:
• The PURE DIRECT indicator above lights up.
• Audio signals are not output at the OPTICAL
DIGITAL OUT jack and the COAXIAL DIGITAL
OUT jack (see page 8).
• The front panel display is turned off and only the
minimum required indicators and messages are
displayed.
y
• Press again to turn off the PURE DIRECT mode.
• This setting is retained even if you turn off this unit.
5 Disc tray
Loads a disc.
5