Remote Control - Yamaha CD-S1000 Bedienungsanleitung

Controls and functions

■ Remote control

1
SA-CD/CD PURE DIRECT
2
CD
DIMMER
3
1
4
4
7
0
REPEAT PROGRAM
5
6
7
10
En
OPEN/CLOSE
8
9
DISPLAY
0
2 3
5 6
8 9
ENTER CLEAR
A
B
RANDOM
C
D
E
F
G
1 Infrared signal transmitter
Sends infrared signals to this unit.
2 SA-CD/CD
Switches the playback layer of a hybrid SA-CD between
SA-CD and CD (see page 19).
y
• The SA-CD/CD indicator on the front panel lights up when the
SA-CD layer is selected.
• This setting is retained even if you turn off this unit.
Notes
• Audio signals are only output from the ANALOG OUT jacks
while the Super Audio CD layer is playing.
• Audio signals recorded in DSD multi-channel format cannot be
played on this unit.
3 DIMMER
Selects brightness level for the front panel display. Each
time you press DIMMER, the brightness level changes in
the following order.
→ Brightest → Bright (default)
Darkest ← Dark ←
y
This setting is retained even if you turn off this unit.
4 Numeric buttons
Use to select a track directly.
Note
This operation is ineffective for MP3 or WMA discs.
5 REPEAT
Repeats playback of a single track or all tracks. Each time
you press REPEAT during playback, the repeat playback
mode changes as follows:
• REP S (single repeat playback): On reaching the end of
the current track, playback repeats from the beginning
of the current track.
• REP ALL (all repeat playback): On reaching the end of
the last track, playback repeats from the beginning of
the first track.
Note
This operation is ineffective for MP3 or WMA discs.