Maintenance And Cleaning - Klarstein Rubybar Bedienungsanleitung

MAINTENANCE AND CLEANING

Maintenance
Attention! Careful and regular maintenance of the infrared heater is
necessary to obtain a long and efficient operation of your appliance.
• Check the cleanliness of the reflector and IR filament at least once a month. If
necessary, follow the cleaning and maintenance instructions.
• The number of checks may be increased depending on the amount of dust in
the environment.
• During cleaning, visually inspect the reflector, wire and frame for deformation.
In case of deformation, consult a qualified technician.
• Visually inspect the power cord and plug while cleaning the fixture. If there is
any deformation, consult a qualified technician.
• It is recommended that the reflector be replaced every 2 years for more
efficient operation.
Cleaning
WARNING: Risk of electric shock
Remove the power cord from the wall outlet before cleaning.
After cooling products. Don't immerse the appliance in
wateror other fluids when cleaning.
Attention! Regular and careful cleaning will help your heater to work
efficiently for many years.
• For your safety, unplug the power cord before cleaning the appliance.
• Using a slotted screwdriver, remove the front grid wire through the inlets on
the frame.
• The reflector and filament should be cleaned with a soft cloth, soft brush or
cool or dry air. The cloth may be damp, but never too wet, and the cleaning
agent must not contain any chemicals.
• Do not use cleaning products that could damage the reflector (detergents,
etc.).
• Replace the grille using a flat screwdriver.
EN
23