VEVOR P3 PRO Originalanleitung Seite 23

5. Tilt Detection
5.1 Operating Instructions:
5.1.1 After this function is enabled, if the machine tilts at an angle between 15° and
20° relative to the horizontal plane, the function will be triggered:
– The machine will automatically stop working,
– A buzzer will sound,
– An alarm message will appear on the PC software,
– If a control screen is present, the message "The machine is tilted" will be
displayed.
5.2 There are two ways to clear the alarm:
5.2.1 Without control screen: The alarm will automatically clear once the machine
returns to a level position.
5.2.2 With control screen: Tap "Close" on the screen to dismiss the alarm
.
6.Flame Detection & Active Fire Extinguisher （Active fire extinguisher is sold
separately)
6.1 Precautions:
6.1.1 When used outdoors, direct sunlight may cause false triggers of the flame
detection function. Indoor use is recommended.
6.1.2 You can enable or disable the flame detection function via the control screen,
the AtomStack APP, or AtomStack Studio.
- 22 -