PeakTech 2795 Bedienungsanleitung Seite 21

4. Memory Call Button Operation
The PeakTech
a value please press the MEM-key while measuring with the
MEAS-key at the same time. The memory number will be
displayed (DATA 0 ... 9).
To recall the stored values please press the MEM-key. You can
switch the stored measurement values (DATA 0 ... DATA 9) by
pressing the MEM-key.
If measuring a frequency (RPM,rpm,Hz) Max, Min and Average
values of this measurement will be stored additionally. For range
measurements (M/M, Y/M, I/M, F/M) Max, Min and Average
values of this measurement will be stored additionally which can
be converted to other measurement units (example: M/M in Y/M).
The revolution counting (REV) can't be converted and also no
additional values (Min,Max,Avg) will be stored.
Chart of the saved values:
Mode
rpm
RPM
M/M
Y/M
I/M
F/M
Mode
REV
M
Yd
In
Ft
®
2795 can store up to 10 measurements. To store
Memory values
Max/Min/Avg
Max/Min/Avg
Max/Min/Avg: Y/M, I/M, F/M
Max/Min/Avg: M/M, I/M, F/M
Max/Min/Avg: M/M, Y/M, F/M
Max/Min/Avg: M/M, Y/M, I/M
Memory values
REV Endwert
Yd,In,Ft
M,In,Ft
M,Yd,Ft
M,Yd,In
-20-