Beurer FT 100 Gebrauchsanweisung Seite 34

The temperature measurement unit flashes on the display (Fig. 6).
You can set the device to display the temperature in degrees Celsius (°C) or
degrees Fahrenheit (°F).
• To display the temperature in Celsius, select °C using the MODE/MEM but-
ton and confirm with the LIGhT/sET button.
• To display the temperature in Fahrenheit, select °F using the MODE/MEM
button and confirm with the LIGhT/sET button.
The acoustic signal symbol flashes on the display (Fig. 7).
You can activate/deactivate the acoustic signals (device activation, measure-
ment in progress, measurement completion).
• To activate the acoustic signals, use the MODE/MEM button to select
and confirm with the LIGhT/sET button.
• To deactivate the acoustic signals, use the MODE/MEM button to select
, and confirm with the LIGhT/sET button.
34
Fig. 6
,
Fig. 7