Inspection Plan - O2Feel Buzz Benutzerhandbuch

3.2 Inspection plan

We recommend the following maintenance plan to make sure that your bike lasts and continues to be a
pleasure to ride. Apart from the maintenance plan, regularly check the brakes, tire pressure, steering and rims.
Every time after
using the bike
After the first 200km
then every year
Between 300km
and 500km
After 1,000km
After 3,000km
After coming into con-
tact with rain / snow /
mud / sand etc.
• spokes,
• wear and concentricity of the rims,
• damage to and the presence of
foreign bodies in the tyres,
• quick releases,
• tyres and air chambers.
Check the tightening torques for the:
• handlebars,
• pedals,
• rods,
• saddle,
• seat post and screws
Check for wear and if necessary
replace:
• chain,
• cassette,
• cogs,
• rim and rim linings.
Check the brake hubs and, if necessary, replace the brake pad or lubricate it
with an appropriate lubricant.
For working relating to:
• hubs,
• headset,
• pedals,
• gear cables and brake cables
Clean and lubricate:
• gear changing mechanism,
• brakes (apart from the brake surfaces) and chain.
• gears and suspension working
properly,
• brakes and seals on hydraulic
brakes,
• lights and bell.
Have the adjustment of the following
components checked:
• headset,
• gears,
• brakes,
• elements of the suspension system
• Tightening the stand
• Cable condition
Clean the chain, cassette and cogs.
Lubricate the chain with an
appropriate lubricant.
Make sure all screws are fastened.
Use a specialist repair shop to:
• take them apart,
• check them,
• clean them,
• lubricate and, if necessary, replace
them.
44