Max Authorised Load; Familiarise Yourself With Your Bike; Adjusting The Position; Adjusting The Saddle - O2Feel Buzz Benutzerhandbuch

idea to have your bike serviced regularly by your
approved O2feel reseller.
Check your tyre pressure whenever you are about
to go out. The recommended pressure is indicated
on the side of the tyre.
Regularly check that the screws are tight (pannier,
stem, handlebars, wheels, brakes, saddle).

1.5 Max authorised load

The total weight loaded on the e-bike (bike's
weight included) cannot exceed 180 kg.

2. Familiarise yourself with your bike

2.1 Adjusting the position

2.1.1 Adjusting the saddle

The first thing you can adjust is the height of the
saddle. Your reseller may help you do this. If the
position of the saddle feels uncomfortable, please
do adjust it. An incorrect position can actually
cause medium and long-term injuries.
The height of the saddle can be adjusted by
unscrewing the seat clamp with a 5mm Allen key,
or by opening the quick release lever.
Recommended tightening torque: 7 Nm
Regularly check if the rims are without any cracks
or signs of wear and tear.
To avoid the theft of your e-bike, avoid to park
in crowded areas. Lock your e-bike through the
frame to a solid, tall and non-movable object.
The empty weight of this e-bike is: 33,5 kg.
N.B., all seat posts have a minimum insertion
level which is indicated on the post ("min" or
"stop"). It is not a good idea to pull the saddle
higher than this limit to guarantee your safety.
Once the height of the seat has been adjusted, you
can change its angle. We recommend starting with
the seat horizontal and adjusting it to suit you.

2.1.2 Adjusting the handlebars

Our bikes have already been adjusted to guarantee
optimum ergonomics.
However, if you need to adjust the cockpit, we
recommend following these steps.
If you would like to adjust the angle of the
handlebars, you need to unscrew the stem and
angle the handlebars until you find the most
comfortable position for you. Then tighten the
stem screws (6/8Nm if the stem has 2 screws,
4/5Nm if it has 4).
27