Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch PFS 5000E Originalbetriebsanleitung

OBJ_BUCH-2026-003.book Page 20 Thursday, April 2, 2015 9:28 AM
20 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is only intended for spraying emulsion and latex
paints, solvent-based and water-dilutable lacquers, glazes,
primers, clear lacquers, wood stains, oils (ALLPaint) and water.
The power tool is not suitable for spraying caustic solutions,
acidic coating materials and house paints.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Spray gun
2 Air cap
3 Union nut
4 Thumbwheel for spraying capacity
5 Trigger switch
6 Lock ring
7 Container for spray material
8 Spare container for spray material
9 Hose port (spray gun)
10 Nozzle cap (white: for a "wall" application)
11 Nozzle cap (grey: for a "wood/glaze" application)
12 Nozzle cap (black: for a "wood/lacquer" application)
13 Filling sieve
14 Transfer bucket*
15 Nozzle needle
16 Container seal
17 Suction tube
18 Ventilation hole
19 Paint channel
20 Air hose
21 Bayonet lock
22 Base unit
23 Carrying handle
24 Holding clamp
25 On/off button with air flow control
26 Hose connection (base unit)
27 Accessory compartment
28 Cleaning brush
29 Air filter cover
30 Air filter
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 164 | (2.4.15)

Technical Data

Fine-spray System
Article number
Rated power input
Spraying capacity
Required time for application
2
of paint on 3 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards:
EN 60745-1, EN 50580.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 02.04.2015

Noise/Vibration Information

Sound emission values determined according to
EN 60745-1, EN 50580.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-1, EN 50580:
2 2
a <2.5 m/s , K= 1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different ap-
plications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
PFS 5000E
3 603 B07 2..
W 1200
ml/min 500
min 1
ml 1000
m 4
kg 5.2
/II
Bosch Power Tools