Detailed Description; Product Description And Specifications; Intended Use; Product Features - Bosch PFS 5000 E Originalbetriebsanleitung

Symbols and their meanings
"Wood/varnish" ap-
plication:
The fine-spray system is
Spraying varnishes and
suitable for varnishes
primers
and lacquers and for
wall paints.
Choose the grey nozzle
cap (11) for the "wood/
varnish" application
Step 1:
Choose the correct
nozzle cap
Select setting 1, 2 or 3
on the thumbwheel (4)
for the "wood/varnish"
Step 2:
application
Setting the spray mater-
ial quantity
Set the "wood/varnish"
application at the air
flow control (25)
Step 3:
Setting the air flow
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for spraying all common paints:
Emulsion and latex paints (wall paints), solvent-based and
water-dilutable (recommended) lacquers, varnishes,
primers, impregnations, clear lacquers (ALLPaint), oils and
water.
The power tool is not suitable for use with caustic solutions,
wood stains, acidic coating materials, disinfectants, pesti-
cides and house paints.
Bosch Power Tools
"Wood/lacquer" ap-
"Wall" application:
plication:
Spraying emulsion and
Spraying solvent-based latex paints
and water-dilutable lac-
quers, clear lacquers
and oils
Choose the black nozzle Choose the white nozzle
cap (12) for the "wood/
cap (10) for the "wall"
lacquer" application application
Select setting 4 or 5 on
Select setting 1, 2 or 3
on the thumbwheel (4) the thumbwheel (4) for
the "wall" application
for the "wood/varnish"
application
Set the "wood/varnish"
Set the "wall" applica-
application at the air
tion at the air flow
flow control (25)
control (25)

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spray gun
(2) Air cap
(3) Cap nut
(4) Thumbwheel for spraying capacity
(5) Trigger switch
(6) Lock ring
(7) Container for spray material
(8) Spare container for spray material
(9) Hose port (spray gun)
(10) Nozzle cap (white: for "wall" application)
(11) Nozzle cap (grey: for "wood/glaze" application)
(12) Nozzle cap (black: for "wood/lacquer" application)
(13) Filling sieve
English | 21

Detailed description

(see "Intended Use",
page 21)
(see "Changing the
nozzle cap (see
figures B1–B2)",
page 22)
(see "Setting the spray
material quantity (see
figure J)", page 24)
(see "Setting the air
flow (see figure D)",
page 25)
1 609 92A 7VA | (30.05.2022)