In Input Functionality - Zamel Exta Life Rdp-21 Bedienungsanleitung

IN INPUT FUNCTIONALITY

The IN input is used in a wired control of the RDP-21 dimmer. It is fully configured by means of the
EXTA LIFE mobile application. The configuration means choosing this type of switch that is con-
nected to a dimmer's input, operation mode and time value in case of selecting time mode.
Default settings:
• Switch type: 1 push-button monostable switch
• Operation mode: bistable (sequential mode change + brightness control).
• The IN input is triggered only from the "L" line. The input operation is described in the "Function-
ality during IN external input control" chapter.
Input configuration change:
1. Activate the application and enter the Device screen.
2. Select the 'Configure' option from the RDP-21 dimmer's menu.
3. Expand the screen and:
• define the switch type connected to the IN input in the 'Input type' field. Choose from 'mon-
ostable push-button' or 'bistable push-button',
• define the IN input operation mode in the 'Input mode',
• define the "Input time" parameter in case of time mode selection – it defines the dimmer's
output switching on time after triggering the IN input in time mode. Time is defined in the
range of 1 s. to 18 hrs.
4. Press the 'Save' button to save all settings – the settings are saved in the receiver.
Define the
switching on
time, if the input
operates in time
mode