Functionality By Means Of External In Input Control; Monostable 1 Push-Button Switch (Default For In Input) - Zamel Exta Life Rdp-21 Bedienungsanleitung

Functionality by means of external IN input control

MONOSTABLE 1 PUSH-BUTTON SWITCH (DEFAULT FOR IN INPUT)

• Switch on / switch off control with lighting luminous flux intensity adjustment (default for the IN
input) – bistable mode (sequential mode change ON / OFF). Operation in accordance with 1
push-button mode for radio transmitters. Additionally, two quick input (IN) presses cause the
load is switched on to 100% brightness.
• Time mode control.
Operation in accordance with time mode for radio transmitters. This mode is configured by
means of the EXTA LIFE mobile application in cooperation with a controller. Switching on time
can be adjusted in the range from 1 sec. to 18 hrs. ("Time for input" parameter).
BISTABLE 1 PUSH-BUTTON SWITCH
• Switch on / switch off control to the last remembered level + switching on the light to 100% -
bistable mode (sequential mode change ON / OFF).
In case of a bistable switch control, each change of switch mode causes mode change on the
dimmer's output. It is only possible to switch on and switch off the last remembered level. Two
quick changes cause the load is switched on to 100% brightness.
CAUTION: There is no possibility to adjust the lighting luminous flux intensity in coop-
eration with a bistable switch.
• Time mode control.
Operation is in accordance with time mode control for monostable switches, except that switch-
ing on the dimmer's output for a defined time or its switching off is activated by a mode change
on the input IN (switch position change).
Functionality control by means of the EXTA LIFE mobile application
• Control of the RDP-21 dimmer by means of a mobile application is possible only after it has
been paired with the EXTA LIFE controller (see RDP-21 RECEIVER REGISTER (PAIRING) in
EXTA LIFE SYSTEM).
• After pairing, the switch is visible on the receivers' list in the EXTA LIFE system and can be
controlled at once.
Dimmer's name
Icon signalling
current dimmer mode
(ON/OFF)
Push-buttons to define
4 favourite adjustments
Current value of lighting
luminous flux intensity
Slide controlling the lighting
luminous flux intensity 1 ÷ 99 %
Push-button controlling
switching on / switching off
(ON/OFF)