ZAMEL exta life RDP-21 Bedienungsanleitung Seite 30

• Clicking the "ON/OFF" control push-button switches on a dimmer to the last remembered level
or switches it off. Current value of lighting luminous flux intensity is shown by the parameter
"Brightness level" and by the slide position. Dimmer's mode is signalled by means of an icon
and by a backlit control push-button.
• In case the "Switching on time" parameter is adjusted in dimmer's configuration options, then
the dimmer operates in time mode in the application. After clicking the "ON/OFF" control push-
button, the dimmer is switched on. After the adjusted time is over, it is switched off automati-
cally.
• In case of slide control, move it to adjust the luminous flux intensity value. The adjustment is
in the range from 1% to 99% where 1% is the defined minimum level and 99% is the defined
maximum level (see Configuration Parameters). The percentage value adjusted on the slide
is sent to the RDP-21 device continuously, and therefore the value changes are immediately
shown on the dimmer's output.
• If a dimmer is switched off and the slide position is changed, it will result in switching on the
dimmer to the current lighting luminous flux intensity shown by the slide.
Favourite settings:
• It is possible to define 4 favourite settings, understood as a percentage value of lighting lumi-
nous flux intensity, by means of a mobile application for each RDP-21 dimmer. To activate the
settings by the application, use the i.e. favourite push-buttons.
• Initially the settings are not defined. It is signalled by the "-" symbol placed inside the button.
• In order to assign a favourite setting to a particular push-button, use a slide to adjust the lumi-
nous flux intensity value and press it for a longer time. The properly assigned value is shown
inside the field.
• After a short pressing of the defined favourite push-button, it is backlit and the value defining
the luminous flux intensity is sent to a particular dimmer. At the same time the slide moves to
the position corresponding the selected favourite setting. By changing the slide position, the
favourite setting is switched off.
• Favourite settings are assigned to a particular dimmer. They can be defined only by a user with
administrator rights. The settings cannot be changed by standard users.
Caution! Favourite setting can be activated even if a dimmer is switched off (OFF). As a
consequence, the dimmer is switched on with a luminous flux intensity value defined by the
activated favourite setting.