ZAMEL exta life RDP-21 Bedienungsanleitung Seite 35

DELETING SELECTIVE PUSH-BUTTON FROM RDP-21 MEMORY
In the EXTA LIFE system receivers, there is a possibility to delete selectively push-buttons from
a receiver's memory. It allows to delete selected buttons without deleting the whole memory of a
receiver. Push-buttons can be deleted directly (by means of the PROG. push-button) or remotely by
means of the EXTA LIFE application.
DELETING PUSH-BUTTONS BY MEANS OF PROG. PUSH-BUTTON
1. Press the PROG. push-button for about 5 seconds –STATUS LED switches on green and after 5
seconds switches off.
2. After STATUS LED switches off, release the PROG. push-button and next within < 5 sec. press
shortly this push-button that will be deleted from the dimmer's memory. In case a pair of push-
buttons (2 push-button mode) or 2 pairs of push-buttons (comfort mode) were assigned to a
dimmer, then press shortly only one of the buttons (any).
3. The STATUS LED flashes green (3 times) to signal the procedure of selective deleting has been
completed.
DELETING PUSH-BUTTONS BY MEANS OF EXTA LIFE APPLICATION
In case we want to delete remotely transmitter's push-buttons from a dimmer, it is required that the
dimmer is paired with EXTA LIFE controller. To do the above, the following steps must be carried
out:
1. Choose the "Configure" option from the dimmer's menu.
2. Choose "Assigned transmitters" in the configuration menu to display a current list of transmitters
added to its memory.
3. Press the transmitter's name to display details included in its memory (numbers of added push-
buttons, operation modes, assigned time in time mode)
4. Choose the „Delete" option from the transmitter's menu to delete selected push-buttons from a
receiver's memory. A transmitter can also be deleted by sliding the element to the right or left.