Parkside App; Connecting The Product To The Parkside App; Connecting The Product Manually - Parkside Performance Ppmsa 20-Li A1 Bedienungsanleitung Und Originalbetriebsanleitung

The storage temperature for the
o
battery pack
[ ]
between 0 C and 45 C. Avoid
extreme cold or heat during storage to
ensure the output of the battery pack
is not adversely affected.
Before storage: Remove the battery
o
pack from the product.
[ ]
˜ Replacement parts/
Accessories
Customers can obtain compatible
o
replacement parts and accessories via
www.optimex-shop.com.
Have the order number ready for your
o
order.
You can only place orders online.
o
Contact the Lidl service hotline (see
o
„Service") for further information.
Part
Saw blade
[ ]
˜ PARKSIDE app
NOTE
The PARKSIDE app lets you
u
monitor the product and control
certain functions. The functions may
change with updates to the app
and firmware. or more information
on the PARKSIDE app, see the
instructions for the smart battery.
The PARKSIDE app supports the
u
operating systems iOS 15.0 and
above or Android 6.0 and above.
˜ R i nts
To find the product in the PARKSIDE app,
the following requirements must be met:
The PARKSIDE app is installed on
o
your smartphone and Bluetooth
activated.
and the product is
Order number
4707409039999
is
®
The following battery pack is inside
o
the product: PARKSIDE Performance
S a t batt PAPS 20 A1 or
PAPS 20 A1.
This smart battery pack has already
been connected to the PARKSIDE
app.
The product communicates with the
PARKSIDE app via the smart battery
pack.
The smart battery pack is connected
o
to the PARKSIDE app.
The product can communicate with the
o
PARKSIDE app via the Smart battery.
˜ Connecting the product to
the PARKSIDE app
1. Insert the smart battery pack
2. Press on the product.
[ ]
ashes.
[ ]
When the product is connected,
lights up continuously.
3. Open the PARKSIDE app.
4. Tap {Devices}.
The product is displayed in the list. If
the product does not appear in the list,
add the product manually.
˜ Connecting the product
manually
Monitoring and controlling the product
1. Tap {Devices}.
2. Select the product from the list.
The overview page of the product is
displayed.
3. Select the desired setting on the
overview page.
Tap to select the help menu if you
are unsure.
A dialogue box with a description for
the relevant setting is displayed.
.
[ ]
GB/IE 49