Vibration And Noise Reduction; Behaviour In Emergency Situations - Parkside Performance Ppmsa 20-Li A1 Bedienungsanleitung Und Originalbetriebsanleitung

k) Only use saw blade with diameter
according to the description on the
tool.
Safe working
Do not exceed the maximum speed
stated on the product. If indicated, the
speed range must be complied with.
Take circular saw blades with cracks
in them out of service. A repair is not
permitted.
Do not use tools with visible cracks.
Clean tools regularly.
Only clean tool parts made of light
metal alloys with solvents that do not
impair the mechanical properties of
these materials.
Tighten tools and tool bodies in such
a way that they cannot become loose
during operation. Heed the information
on assembly. Tighten the clamping
screw holding the saw blade in place
hand-tight using the enclosed hex key.
Extending a spanner or tightening
with the help of hammer blows is not
permitted.
Clean the tightening surfaces on the
saw blade to remove any dirt, grease,
oil and water.
Use original spare parts from the
manufacturer to ensure safe use (see
"Replacement parts/Accessories").
Maintenance work and modifications
to circular saw blades should only
be performed by a professional,
i.e. a person with specialist training
and experience who is familiar with
the design requirements and the
necessary safety steps.
˜ Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-noise
operating modes as well as wear personal
protective equipment.
Take the following points into account to
minimise the vibration and noise exposure
risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Use correct accessory tools for the
product and ensure they are in good
condition.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it well
lubricated (where appropriate).
Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will help
to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise and
handle risks early. Fast intervention
can prevent serious injury and damage
to property.
Switch the product off if there are
malfunctions. Have the product
checked by a qualified professional
and repaired, if necessary, before you
operate it again.
˜ Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury and
damage remain. The following dangers
can arise in connection with the structure
and design of this product:
GB/IE 43