O St S; Preparation - Parkside Performance Ppmsa 20-Li A1 Bedienungsanleitung Und Originalbetriebsanleitung

Parkside 20 V
battery pack
PAP 20 B1
PAP 20 B3
PAPS 204
A1/B1
PAPS 208 A1
Customers can obtain
compatible replacement
batteries and chargers via
www.optimex-shop.com.
o st s
˜
˜ Unpacking the product
1. Take the product out of the packaging
and remove all packaging materials
and plastic wrappings.
2. Check to make sure that all listed parts
are included (see "Scope of delivery").
3. Check whether the product and all
parts are in good condition, if any
damage or defect is detected, do
not use the product, but follow the
procedure described in chapter
"Warranty".
˜ Preparation
˜ Checking the charging level
of the battery pack
Press next to the charging level
[ ]
o
indicator on the battery pack
[ ]
The charging level of the battery
o
pack is indicated by illumination of
[ ]
the corresponding LED lights on the
charging level indicator
Indicator Colour
Red,
orange,
green
2 Ah 5 cells
4 Ah 10 cells
4 Ah 5 cells
8 Ah 10 cells
.
[ ]
.
[ ]
Meaning
Fully
charged
Indicator Colour
Red, orange Partially
Red
˜ Charging the battery pack
NOTICE! Risk of damage to the
m
batt a
[
Do not expose the battery pack
u
to direct sunlight for long periods
and do not place it on a radiator.
Observe an ambient temperature of
max. 50 C.
NOTE
You can find detailed instructions in
u
the user manual of the charger
If the battery pack
u
allow it to cool down before
charging.
The battery pack
u
at any time without reducing its life.
Interrupting the charging process
u
does not damage the battery
pack .
[ ]
1. Remove the battery pack
product.
2. Push the battery pack
charging slot of the charger
3. Connect the charger
outlet.
4. After charging: Disconnect the
charger from the socket-outlet.
[ ]
5. Pull the battery pack
charger .
[ ]
Meaning
charged
Needs to be
charged
!
]
[ ]
.
[ ]
is still warm,
[ ]
may be charged
[ ]
from the
[ ]
into the
[ ]
.
[ ]
to a socket-
[ ]
out of the
[ ]
GB/IE 45