Mitre Saw; Technical Data; Main Components - Power Craft 48000 Gebrauchsanweisung

MITRE SAW

Instruction manual
Read the instruction manual
carefully before use, and keep it for
future reference.
Voltage/frequency
Indicates the required voltage and
frequency of the power supply to
which the machine is connected.
Power rating
GB
Indicates the machine's maximum
power.
Speed
Indicates the machine's speed(s)
or speed range in revolutions per
minute.
Blade size
Indicates the diameter of the
blade.
Cutting depth
Indicates the machine's maximum
cutting depth.
Cutting angle
Indicates the machine's bevel and
mitre range.
Introduction
To get the most out of your new mitre saw,
please read these instructions and the
attached safety instructions before use.
Please also save the instructions in case you
need to refer to them at a later date.
30

Technical data

Voltage/frequency:
Power rating:
No-load speed:
Max. cutting width at 90°/45°:
Max. cutting depth at 0°/45°:
Blade size:
No. of teeth:
Sound pressure:
Sound output

Main components

1. Handle
2. On/off button
3. Release for saw head
4. Blade guard
5. Saw blade
6. Release for saw bench
7. Rest
8. Lock grip, mitre angle
9. Scale on saw bench
10. Rotatable saw bench
11 Base with mounting holes
12. Bench extension
13. Holder for clamps
14. Dust extractor connector
15. Screw for adjusting saw depth
16. Carrying handle
17. Lock knob for bevel angle (not shown)
18. Scale for bevel angle (not shown)
19. Lock pin for saw head (not shown)
230 V ~ 50 Hz
1,200 W
5,000 rpm
120/80 mm
60/35 mm
diameter 210 mm,
hole diameter 30 mm,
width 3 mm,
24 (carbide)
89.2 dB (A)
102.2 dB (A)