FeinTech AX211 Bedienungsanleitung Seite 14

instead, there is an error. Depending on the connected display, you can either fix or ignore this.
This flashing can have the following causes:
◾ The television or projector is not connected to its HDMI ARC port, but to another HDMI con-
nection. In this case, reconnect the HDMI cable and use the connection labelled HDMI ARC
or HDMI eARC on your television or video projector.
◾ A video projector or monitor is connected that does not support HDMI ARC or HDMI eARC. In
this case, leave eARC switched off. Such displays usually do not have their own apps for play-
ing videos, and eARC is not required. You will then not be able to control your sound system
with the player remote control via HDMI CEC.
◾ HDMI eARC or HDMI ARC is switched off on the television or video projector. Or HDMI CEC de-
vice control is switched off (also known as Anynet+ on Samsung, Simplink on LG, Braviasync
on Sony, Easylink on Philips, Vieralink on Panasonic). Please switch this function on in the
display menu.
◾ The player with active HDMI-CEC is switched off, but the display is active. If the flashing both-
ers you, press and hold the eARC LED for 5 seconds and the extractor will switch off. Pressing
eARC again will switch the extractor back on. Or use the auto power function.
◾ If you would prefer to use the ARC function on your AV receiver and play back its OSD menu or
connected players, switch off eARC on the AX211. Then use a normal HDMI input on the tele-
vision for the AX211 and the HDMI ARC port on the television for the AV receiver.
◾ In rare cases, you may still be able to control everything as desired, but the eARC LED will
still flash. You can then ignore it. Even if the eARC LED flashes, the sound from the player can
be extracted without restriction.
14