Installation
5.2
Mounting the measuring device
5.2.1
Required tools
Open-ended wrench or socket wrench 32 AF
– When screwing in, turn by the hex bolt only.
– Torque: 15 to 30 Nm (11 to 22 lbf ft)
5.2.2
Installation
A
A
Thread G ½"
B
Thread G ¾"
C
Thread M24x1.5
Take account of metallic or non-metallic vessels or pipes in accordance with EMC
guidelines, see Technical Information TI01202F.
5.3
Post-installation check
Is the device undamaged (visual inspection)?
Is the device adequately protected from wet conditions and direct sunlight?
Is the device properly secured?
28
B
32 mm
C
32 mm
Liquipoint FTW23
32 mm
A0024688
Endress+Hauser