Liquipoint FTW23
5
Installation
5.1
Installation conditions
The measuring device can be installed in any position in a vessel, pipe or tank. Using a socket
wrench, the measuring device can also be installed at measuring points that are difficult to
access.
The socket wrench 32 AF is optionally available to order → 34.
7
Installation examples
1
Overfill protection or upper level detection (MAX)
2
Pump dry running protection (MIN)
3
Lower level detection (MIN)
In horizontal pipes:
Vertical orientation can affect the measurement. It can be influenced by the fact that the
sensor is not completely covered with liquid or by air bubbles at the sensor.
8
Mounting position in horizontal pipes
Endress+Hauser
3
Installation
1
2
A0016844
A0021052
27