Installing And Connecting The Dc Kit - Waeco DC-Kit2 Montage- Und Bedienungsanleitung

DC-Kit2.book Seite 25 Freitag, 13. Juni 2008 3:09 15
DC-Kit2
7

Installing and connecting the DC kit

a
Caution!
The DC kit may only be installed by a qualified workshop.
The following information is intended for specialists who are famil-
iar with the guidelines and safety precautions to be applied.
a
Caution!
Observe the information in the installation and operating manuals
when installing the components supplied
ECW-012VS inverter
FB1 remote control (for CA2500/B2200)
FB2 remote control (for B1600)
ECL-102 charging current distributor
and for your Dometic roof air conditioner
CA2500
B1600
B2200
Note the following safety instructions during installation:
a
Note the location of wiring harnesses, wiring and other compo-
nents within the installation area.
Install the DC kit using the following instructions. Improper in-
stallation of the DC kit can put the safety of the user at risk and
lead to irreparable damage to the DC kit or other devices.
Disconnect all power supply lines to the individual components
and the roof air conditioner.
Installing and connecting the DC kit
25