Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Always shut down the shredder (power unit
must be disconnected from the mains) when
you leave the work area.
• Do not tilt the machine when the motor is
running.
5.3 Maintenance and Storage
• If the machine is deactivated for mainte-
nance, inspection, storage, or for exchang-
ing a part, (power unit must be disconnected
from the mains), ensure that all moving parts
are still and any tools/spanners have been
removed. Let the machine cool before any
inspection or repair.
• When maintaining the blade mechanism,
make sure that the the power source cannot
activate due to the protective locking device;
the blades could always be activated by a
hand-start mechanism.
5.4 Additional Safety Instructions for De-
vices with Collecting Containers
• Shut down the shredder before attaching or
removing the collecting container.
6. Operating Instructions
WARNING: You may need help unpacking and
assembling the machine.
After unpacking and inspecting the shredder for damage,
proceed with the following steps:
6.1 Assembling the Garden Shredder
1
• Turn the shredder over.
• Fold both legs up and insert the supplied axle through
the openings.
• Place both washers on the left and ride side of the
axle.
GB | Operating Instructions
2
• Place the supplied threaded spacer on the axle. Then
6.2 Collecting Container
• Pull up the safety grip and slide the collecting contain-
7. Operation
7.1 On/off switch
4
• Press the on/off switch to switch on or off the shredder.
7.2 Overload protection
Overload (e.g. blocking up of the chopping knife) will lead
to a standstill of the machine after a few seconds. To pro-
tect the motor from getting damaged, the overload switch
GB-6
attach the wheels and finally the safety nuts with the
wheel covers.
WARNING: Be careful when leaning the device
on the wheels, since the weight is unbalanced
when titled and moved.
er into the under frame.
3
Note: This machine is equipped with an elec-
tromagnetic switch to prevent it from being
unexpectedly switched on when power source
recovered.
on/off
switch
Werbung
Inhaltsverzeichnis
