Safety Instructions For The Garden Shredder - IKRA Mogatec EGN 2500 Gebrauchsanweisung

• Use power tools, accessories, add-on tools,
etc. in accordance with these instructions
and in the way prescribed for the respec-
tive type of tool. You should also consider
the working conditions and the work to
be carried out. The use of power tools for
purposes other than those intended for the
respective tool may result in dangerous situ-
ations.
4.5 Service
• Have the power tool serviced by qualified
technical personnel only; repairs should be
carried out using exclusively original spare
parts. This will ensure the continued safe op-
eration of the power tool.
5. Safety Instructions for the Garden Shred-
der
• Wear protective gloves, glasses, and ear
protection. Do not wear loose-fitting clothing.
• Always position the unit so as to be secure
and balanced. Do not lean on the unit.
• The machine must be located on an even,
stable surface during operation.
• Before using, ensure that all screws and
nuts are tightly fastened.
• Only use in dry conditions and never during
rainy weather.
• Do not use the machine with damaged
protective equipment or without protective
equipment.
• Keep hands, other body parts and clothing
well away from the feeding funnel and the
ejection shaft.
• • Never place your face or other body parts
in the proximity of the feeding funnel.
• Do not leave the machine unattended. Shut
off the motor and unplug the unit.
• Do no feed any hard objects into the funnel
such as stones, bottles, cans or pieces of
metal. This could damage the machine.
• If the machine becomes blocked: shut off the
motor, unplug the unit, remove all objects
from the machine and check it for damages.
• If the fuse has blown or the overload pro-
tection has been triggered, this means that
the machine was overloaded and/or that too
many devices are connected to the same
extension lead. Look for the cause and fix
the problem. Do not install a stronger fuse.
• Do not pull on the extension lead. Do not
make the lead too tight. This could damage
the plug or the cable insulation. This type of
damage may not be visible, but can be dan-
gerous.
• Always keep the extension lead away from
GB | Operating Instructions
• If the cable is damaged, it must be replaced
• Never move the machine by pulling the ca-
• Before using the shredder for the first time it
• Only use extension leads which are suitable
• Before using the unit ensure that there is no
• Always shut down the shredder before un-
• Keep children and animals away from the
• Children or individuals who have not read
• The user of the device is responsible for
• The shredder may only be used for its intend-
• Before undertaking any repair or cleaning
• You do not have the right to remove or mod-
• Only use the shredder during daylight or
• Never place your hands in the feeding fun-
GB-4
the machine. Remove the plug from the
socket and check the cable regularly for
signs of damage or aging. Do not use the
machine with a damaged extension lead.
by a specialist in order to prevent accidents.
ble. Do not move the machine while the mo-
tor is running.
must be assembled properly.
WARNING: This
earthed.
WARNING: Only use three-wire exten-
sion leads with an earth wire.
for the outdoors.
damage to/problems with the cable.
plugging the cable and/or extension lead.
shredder. All others must keep a safe dis-
tance from the shredder when it is operating.
these instructions or who are not familiar
with the shredder may not use the device.
third-parties during operation.
ed purpose.
WARNING: This device has a rotating
blade.
WARNING: The blades do not stop
moving immediately when the device
is shut down.
work, shut down the shredder, remove the
plug from the outlet, and wait until the blade
comes to a complete stop.
ify electric or mechanical protection equip-
ment.
with strong artificial light.
nel or the ejection opening.
device must be