Temperature Display - Vevor Bt-Rtr42-Ecg Originalanleitung

2.UP / DOWN Buttons
Changes the temperature setting in the cooling
trigger, the heating trigger,and the fan speed.

3.1.Temperature display

Displays the current temperature that is
measured by the probe.Used as the default
display.
This mode displays the airflow temperature
measured by the probe.While on this display
mode,the cooling And heating triggers,as well as
the max fan speed setting,are still active unless
you disabled them.
3.2.Controller Lock
To lock the controller, go to the temperature
display mode and then hold the mode button for
three or more seconds. While the display is
locked, you will not be able to switch modes or
adjust settings, but they will be working in the
background. Holding the mode button for three
or more seconds will unlock the controller.
3.3.Hide display
While the controller is locked, you can hide the
display and turn off its backlight by pressing the
mode button. All programs and settings will stil
be working in the background while the display
is hidden. Press any button to show the display
again.
4.Cooling Trigger
- 10 -