HOMCOM DEI23A-B Bedienungsanleitung Seite 16

EN
The switches located at the right hand side of the appliance .The standby switch must be
first switch on.
Press the button once to turn on the appliance and flame effect. A red indicator light
will appear to indicate that the function is ON.
NOTE: Press and hold the
Press the
press third time to switch off the heat setting. And press this button for more than 3s for
temperature decrease.
NOTE: When the high heating is power off, the indicator light and LED screen
showing will flash to heating off.
NOTE: The set temperature must be higher than the room temperature for the heat
working.
Press the
The LED screen will show b00, ..., b12, b- -(no back light), b00(all colors loop). And press
this button for more than 3s for temperature increase.
Remote Operation
NOTE: The heater should be powered on using the ON/OFF switch before it can be
operated using remote control.
1.LED display
1 Cursor
2 Day time
3 Timer
4 Standby
button to operate the dimmer mode.
button once for the low heat setting; press twice for the high heat setting,
button for back light color change, there will be 12 colors for choice.
Temperature/serial number
5
6
7
8 Time/Temperature display
display
Timer off
Timer on
16
Automatic control of
9
heating
10 Heating position
11 Flame brightness