Setting The Time And Date Manually - Grundig GMI4000 Serviceanleitung

GV 30..., GV 50...
62
TIME DATE
12: – – – – / – –
< >
:SELECT
TIME DATE
12:00 10/5
< >
:SELECT
OK :ENTER
GRUNDIG Service
SPECIAL SETTINGS
9
Select the station data you wish to modify with »
new data directly with
Note:
To go back to the previous menu – without saving the modifications – press
» i
INFO
10
Save modifications with » OK«.
– The video recorder automatically switches back to the previous menu
display and automatically selects its next channel position.
11 Press »
SETTING THE DATE AND TIME
Automatically updating the date and time
If channel number 1 on the video recorder is tuned to a station with teletext, the
video recorder uses this to update its internal clock.
The update takes place every Sunday between 3 A.M. and 6 A.M., thus
enabling the video recorder to recognise the switches to and from daylight
saving time.

Setting the time and date manually

1
Switch on the television and select the channel position »AV« on the
television for the video recorder.
2
Press »
Select the »INSTALL« line with » C« or » D« and then press »
CLOCK 3
confirm.
YEAR
– –
*
Select the »CLOCK« line using » C« or » D« and then press »
4
confirm.
– The »CLOCK« menu appears with the »TIME« item highlighted.
0-9 :DATA
:CHANGE
INFO :EXIT
5 Enter the time as four digits using »
6 Enter the date as four digits using »
CLOCK
YEAR
7
Enter the year as two digits using »
00
*
Note:
– » « in the menu means that the clock is updated automatically. To disable
*
this function highlight »
0-9 :DATA
:CHANGE switch it off (» –« appears in the display).
INFO :EXIT
8
Press »
____________________________________________________________________
»0 ... 9« or modify with »
«.
i « to finish the setting.
INFO
i INFO « to open the main menu.
0 ... 9 «.
«.
0 ... 9
0 ... 9 «.
« using » E « and then press »
*
OK « to conclude the setting.
Allgemeiner Teil / General Section
C D
« or » « and enter the
F E
« or » «.
____________________________
« to
OK
« to
OK
C D
« or » « to
63
1 - 35