Grundig GMI4000 Serviceanleitung Seite 34

Allgemeiner Teil / General Section
TIMER
MODE
INSTALL
: SELECT
OK :ENTER
PRESET
CHANNEL
SOURCE
SAT-MODULE
SKIP
:SELECT
OK :ENTER
PRESET
CHANNEL
SOURCE
SAT-MODULE
SKIP
:SELECT
OK :ENTER
60
PROGRAM
FREQU.
POL/ANT. HOR
AUDIO
MODE
AUDIO BW
DECODER
LNB LO 1
CONTRAST
:SELECT
OK :ENTER
1 - 34
SPECIAL SETTINGS
Setting television stations from the VCR-SAT module
Preparation
Switch on the television.
Select the channel position »AV« on the television for recorder playback.
MENU
Setting
1
Press »
Select the » INSTALL« line using » C« or » D« and activate by pressing
2
» OK «.
INFO:EXIT
3 Highlight the »CHANNEL SELECTION« line by pressing »
4
Highlight the »CHANNEL PRESET« line by pressing »
SAT15 31
– The station tuning menu appears on the screen, and the »PRESET« line is
SAT01
highlighted.
SAT
MENU
Note:
OFF
If the television picture makes it difficult to see the menu, press » DUB« and it
will appear on a blue background.
< >
:CHANGE
INFO :EXIT
5 Select the desired channel position, where a new satellite station is to be set,
with the »
SAT15 31
Select the » SOURCE« line by pressing » C« or » D« and select the » SAT«
SAT01 6
SAT
display by pressing »
MENU
OFF
7 Select the » SAT-MODULE« line with » C« or » D« and activate » MENU«
by pressing »
– A menu with the station data of the selected satellite station appears on the
< >
:CHANGE
INFO :EXIT
screen. The »FREQU.« line is highlighted.
SPECIAL SETTINGS
– The menu offers the following settings for the satellite station.
15
10964,0 MHZ
A LOW
PROGRAM
7,02/7,20 MHZ
SSTEREO
110 KHZ
FREQU.
OFF
9 , 750 GHZ
POL/ANT:
2 (32)
:CHANGE
INFO:EXIT
AUDIO
MODE
AUDIO BW
DECODER
LNB LO1
CONTRAST
8
Enter the frequency directly with »
change the frequency step-by-step with »
Press » INDEX« until the "new" satellite station appears on the screen.
____________________________________________________________________
i INFO« to call up the main menu.
F « or » E « buttons.
F « or » E «.
F « or » E «.
____________________________________________________________________
15 Channel number of the selected satellite
station.
109640.0 MHZ Station frequency of the satellite station.
HOR A LOW LNB settings:
Polarisation HOR (horizontal)
VER (vertical);
Satellite selection A (for example, ASTRA)
or B (for example, Eutelsat);
LOW = lower frequency band;
HIGH = upper frequency band.
Left/right audiofrequency.
7.02/720 MHZ
STEREO Set sound type (STEREO, MONO, 50µS,
75µS, J17).
Set the sound to obtain optimal sound
quality.
110 KHZ Band width setting. Set the sound to obtain
optimal sound quality.
ON/OFF Decoder for coded satellite stations
on/off.
Oscillator frequency of the satellite
9.750 GHZ
receiver (LNB).
(32) Modify picture contrast of the selected
satellite station. Set to obtain optimal
picture quality.
0 ... 9« or
F « or »
GV 30..., GV 50...
«.
OK
OK «.
E « or
61
GRUNDIG Service