Connection And Preparation - Grundig GMI4000 Serviceanleitung

GV 30..., GV 50...
EURO-AV1 EURO-AV1
DECODER/ DECODER/ EURO-AV2 EURO-AV2
14
GRUNDIG Service

CONNECTION AND PREPARATION

4
Connect the
to the »VCR« socket on the VCR-SAT module with a standard Scart cable.
5
L L Connect the »
AUDIO AUDIO
TV TV
OUT OUT
R R
(control line) on the VCR-SAT module with a standard Scart cable.
6 Plug the satellite antenna cable into the corresponding antenna socket
(INPUT-SAT) on the VCR-SAT module.
12
7
Note:
The socket
PAY-TV decoder.
If a VCR-SAT module is installed in this socket, connect the PAY-TV decoder to
the »DEC« socket of the VCR-SAT module.
In this case, the decoder can only be used for television stations supplied by
the VCR-SAT module.
7
Plug the mains cable supplied into the
recorder, and plug it into the mains wall socket.
– The video recorder is now in standby mode.
8 Connect the VCR-SAT module to the mains supply.
Caution:
The only way to isolate the video recorder and the VCR-SAT module from the
mains is to pull the plug.
_______________________________________
»DECODER/ Y EURO-AV 2« socket on the video recorder
« socket on the video recorder to the »SAT-LINK« socket
»LINE 2 (II) IN/DECODER« can also be used for connecting a
~
»AC IN
Allgemeiner Teil / General Section
« socket on the video
1 - 25