Navigation - ergoline OPEN SUN PILOT Gebrauchsanweisung

06/2011 1004193-01
4.6.1

Navigation

The equipment is operated using the buttons on the control element. The
individual functions are selected via the buttons next to them.
Switch application on and off, pause.
Confirm function (only for Audio system / Voice Guide picto-
gram).
Select sub-function (only for Audio system / Voice Guide
pictogram).
Switch a function on or off.
Increase the setting (for status bar display), e.g. volume.
Change music track or studio channel.
Decrease the setting (for status bar display), e.g. volume.
Change music track or studio channel.
All of the pictograms displayed on the screen are illuminated in default mode
after the device starts up.
The relevant pictogram will start to flash after a device function has been
selected. The settings or selection options available for the selected function
will be displayed on the screen, see 'Operating structure' on page 28.
NOTE:
If a button is not pressed within 8 seconds, the settings re-
turn to default mode.
Operation
Operating instructions – 27