ergoline OPEN SUN PILOT Gebrauchsanweisung Seite 105

Cleaning and maintenance
42
– UV low pressure lamps possess a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.
– Push the pins vertically into the socket from above.
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the user).
The assembly is the same process in reverse order.
When assembling please note:
– Insert the screws with the washers.
– Remove fingerprints and other soiling carefully.