How To Use Your Device; Before Use; Start The Device; Floor Compatibility - Rowenta X-Clean 2 Gebrauchsanweisung

4 / HOW TO USE YOUR DEVICE

BEFORE USE

Fill the water tank.
1
Remove the
clean water tank.
4
Fill the clean water tank.
Use water between 10 °C
and 50 °C.
The maximum capacity is
730 ml.

START THE DEVICE

Device must be off the charging base.
PARKING POSITION
The device is upright.
In parking position the
device stops working.
SELECT YOUR MODE AND START CLEANING

FLOOR COMPATIBILITY

This device is compatible with hard floors only.
WOOD
Don't use on rugs, carpets, walls and windows (Refer to the « Safety &
Use instructions » booklet).
2
Open the clean
water tank.
5
Place the clean
water tank back.
In usage position press the ON/OFF
button. By default the product starts up
in ECO mode. Press it again to STOP.
The device shuts off after 3 seconds.
ON
PRESS
In parking position the device stops working.
TILE
3
* The addition of cleaning
solution is optional.
Do not use foaming
solutions, bleach, white
vinegar, black soap,
dishwashing liquid,
essential oils (Refer
to the « Safety & Use
instructions » booklet).
USAGE POSITION
In usage position, tilt
the product to unlock
the head. Then the
device can be used.
To resume cleaning, press
ON/OFF button.
LAMINATE
Add cleaning
solution*.
LINOLEUM