ROWENTA X-CLEAN 2 Gebrauchsanweisung Seite 9

4 - WHEN THE SELF-CLEANING IS
FINISHED, CLEAN THE DIRTY WATER
TANK
1
Remove the dirty
water tank.
3
Remove the filter.
5
Flush the waste
down the toilet.
6
Clean the dirty
water tank with
the cleaning brush
accessory.
8
Replace the anti-
crash foam.
10
Replace the dirty
water tank cover.
5 - DRY THE ROLLER
1
1 1
Press on the
push-button.
3
Remove the roller.
6 - EMPTY THE CLEAN WATER TANK
To avoid stagnant water, empty the clean water tank.
Remove the
1
clean water tank.
2
Remove the dirty
water tank cover
by pulling.
4
Remove the anti-
crash foam.
OR
5
To separate liquid and solid
waste, use the waste separator
on the cleaning brush. Flush the
liquid waste down the toilet and
throw away the solid waste.
7
Remove
remaining dirt
and clean the
filter area.
9
Replace the filter.
11
Place the dirty
water tank back.
2
2
Lift up the roller
cover to remove it.
4
Let the damp roller dry
out of the device on the
dedicated slot on the
charging base.
Empty the clean
2
water tank.
WATCH THE
VIDEO HERE
WATCH THE
VIDEO HERE
1
2
2
Unclip the roller.
3 Place the clean
water tank back.