ROWENTA X-O Bedienungsanleitung Seite 176

BEFORE THE FIRST USE
EN
H o w t o p a i r m y
remote control?
BOOST
MAX
HIGH
ECO
What you need to do:
1
Take off the plastic tab
before the first use.
2
Switch your appliance on:
Press on/off button.
3.1
Launch pairing:
Press simultaneously
and buttons.
3.2
Confirm pairing:
Press immediately after step
3.1 on button
(while LEDs are blinking
alternatively)
Congratulations! You have successfully paired your remote control.
POWER BUTTON ON/OFF
To t u r n o n a n d o f f y o u r
appliance, press shor tly the
Power button.
To start vacuuming, press on
ECO, HIGH or MAX speed on
your remote.
176
Pa i r yo u r r e m o t e c o n t r o l
before the first usage.
To be done only once.
What you can see on your appliance:
Battery blue LEDs are lighting.
- You hear a confirmation beep
- Battery blue LEDs and green
MAX
speed indicators LEDs are
blinking alternatively
- Blue LEDs keep lighting
- You hear a double beep
If you did not hear double
.
beep after 10 seconds: pairing
has failed. Switch your
appliance off and start again
from step 2.
POWER MODE
Your appliance has 4 power modes for different tasks. Change
cleaning modes using your remote control buttons and adjust
the power:
BOOST : 5/10min*
Intensive cleaning for ground-in-dirt.
NB: Keep pressing the BOOST button to use
this mode .
BOOST
MAX: 20/40min*
Intensive cleaning and encrusted dust.
MAX
Ideal on all types of carpets.
HIGH: 40/50/90min*
HIGH
For maintenance cleaning. Ideal for all
ECO types of hard floors.
ECO: 1h10/1h30/2h40min*
For lightly soiled floors and delicate surfaces:
shelves, frames, curtains etc.
PAUSE:
Temporary shutdown during use.
The LEDs indicate the
power modes.
I n BO OS T mo d e, all
three green lights will
flash on simultaneously.
*depending on model.