How To Maintain Your Device; Once A Week; Every 6 Months - Rowenta X-Clean 2 Gebrauchsanweisung

5 / HOW TO MAINTAIN YOUR DEVICE

ONCE A WEEK

1 - CLEAN THE CHARGING BASE
Do not put the charging base under water.
1 Unplug the charging
base from the power
source.
2 - CLEAN THE SUCTION PIPE
3 - CLEAN THE ANTI-CRASH FOAM AND THE FILTER GRID
1
Remove the dirty
water tank cover.
4
Open the filter
grid.
4 - CLEAN THE HEAD AND THE ROLLER COVER
1
1 1
Press on the
push-button.
3
Remove the roller.
6
Use the blade included in the cleaning brush accessory to remove
hair around the side brush.
7
Place the roller
back.

EVERY 6 MONTHS

Change the roller and the filters. If you find the roller is damaged,
change it before.
www.rowenta.com www.tefal.com www.t-fal.com www.arno.com
2 Hand-clean the
charging base with
a dry or damp cloth.
2
Remove the filter.
5
Only clean and
rinse the filter grid.
Do not put the
entire filter under
water. If so, let it
dry for 48 hours.
2
2
Lift up the roller
cover to remove it.
4
Clean behind
the roller.
8
Place the roller cover back.
Dry filter and
anti-crash foam
WATCH THE
VIDEO HERE
Use the cleaning
brush accessory
to clean remaining
dirt from the
suction pipe.
3
Remove the anti-
crash foam.
6
Clean under
water the anti-
crash foam. Let
if dry out of the
product.
1
2
2
Unclip the roller.
5
Clean the inside
of the roller cover.
CLICK
Roller and
side-brush