Screen Display; Screen; Maintenance Indicators; Battery Indicators - Rowenta X-Clean 2 Gebrauchsanweisung

3 / SCREEN DISPLAY

SCREEN

ECO MODE
Maintenance
indicators
MODE SELECTION
button

MAINTENANCE INDICATORS

The clean water
tank is empty.
Action : Fill the
clean water
tank
HOW TO CHANGE MODES
Device must be ON and in usage position.
PUSH
MODES EXPLANATION
ECO MODE
Surfaces: moderately dirty
Suction power:
Water flow:
Running time: up to 35 min

BATTERY INDICATORS

A full charge takes approximately 4 hours.
0% - 40%
If battery is low, the battery level logo will blink. Return the device to
The dirty water
tank is full.
Action : Empty
the dirty water
tank
Press the ECO/MAX button to switch
between modes.
Surfaces: very dirty
Suction power:
Water flow:
Running time: up to 20 min
40% - 70%
the charging base.
MAX MODE
Maintenance
indicator
Battery level
indicator
ON/OFF button
The roller is
blocked.
Action : Check
and remove
blocking waste
MAX MODE
70-100%